HDMI Matrix 4x2 with ARC RS232 EDID Function (HY-4022-V1-A)

SKU HY-4022-V1-A Category

HDMI Matrix 4×2 with ARC RS232 EDID Function

Features

  • Four HDMI input signals switched or split to two HDMI sink devices.
  • Output HDMI A is with audio output through Toslink and Stereo.
  • Audio sync separator output can be achieved with 2CH, 5.1CH, pass three audio modes selectable.
  • Supports 3D.
  • Supports 4K x 2K x 60Hz.
  • With HDMI-CEC function.
  • Supports deep color 30bit, 36bit.
  • Supports Blue-Ray 24/50/60fps/HD-DVD/xvYCC.
  • Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/Dolby-AC3/DSD.
  • Supports signal retiming.
  • Supports input no mre than 10 metres (AWG24 HDMI standard cable length).
  • Inputs can be switched with the IR remote control, also can be controlled by two buttons.
  • It can come back to the return to default input 1 when restart or reset.
  • LED indicator: when any one of the input of sources is selected, the relative input LED indicator will be on, when either of the output is selected, the relative output LED indicator will be on.
  • No loss of quality.
  • installl in minutes.

 

Specification:

HDMI version……………………………………………………HDMI 2.0, HDCP 2.2
HDMI resolution………….24/50/60fps/480i/480p/576i/576p/720p/1080i/1080p
/4K x 2K@24/25/30fps@60Hz.
Support video color format……………………24 bit/deep color 30bit, 36bit, 48bit
Support audio format..DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Audio output……………………………………………………SPDIF and RCA stereo
Max transmission bandwidth…………………………………………………..340MHz
Max baud rate……………………………………………………………………18Gbps
Input/Output TMDS signal……………………………………………0.5~1.5Volts p-p
Input/Output DDC signal……………………………………………..5Voltsv p-p(TTL)
Input cable distance…………………………<10m AWG24 HDMI standard cable
Output cable distance…………………………<10m AWG24 HDMI standard cable
Working current………………………………………………………………….1.3A max
Power adapter format………Input: AC100V-240V(50/60Hz); Output: DC 5V/2A
Operating Temperature range…………………………………………..(-15 to +55℃)
Operating Humidity range………………………….5 to 90%RH(No Condensation)
Dimension(LxWxH)…………………………………………………….220x102x27mm
Weight…………………………………………………………………………………..318g
Accessories with the device
  1. 5V power adaptor x1
  2. Remot controller x1
  3. User manual x1

 

Buttons, LED and connection ports
  1. Power button
  2. Infrared red sensor for remote control
  3. HDMI input LED indicators for HDMI A
  4. HDMI input LED indicators for HDMI B
  5. HDMI output LED indicators
  6. HDMI A output select button
  7. HDMI B output select button
HDMI Matrix 4x2 with ARC RS232 EDID Function (1)
 HDMI Matrix 4x2 with ARC RS232 EDID (1)

 

EDID setting

HDMI Matrix 4x2 with ARC RS232 EDID (2)

 

IR Remote Operating lnstruction

  1. Firstly take off the plastic film that inserted in the rear of remote controller.
  2. The A and B signifies the HDMI output A and output B.
  3. If you want signal output from A, just press the numbers on the remote controller below line A. e.g. press the number “2” below line A, the signal input connected with input “2” will output from output A.
  4. ARC:Audio return switch ( only the OUT-A output port support this feature).
  5. SPDIF/: SPDIF and headset audio ON/OFF switch.
  6. Audio 1: A channel to B channel to mute.
  7. Audio 2: B channel to A channel to mute.
  8. Please put the insulation plastic film into rear of remote if it is nto in use for long time.

232 interface definition communication protocol:

Baud rate:9600   Data bits: 8

Stop bit: 1   Check bit: None

Instructions:

A1, A2, A3 and A4 are inputs from port 1-4 of channel a.

B1, B2, B3 and B4 are the inputs of port 1-4 of channel B.

 

Operation and Connection

  1. Connect HDMI source devices with HDMI matrix inputs using an HDMI cable.
  2. Connect display (monitor or projector) with the HDMI matrix outputs using HDMI cable.
  3. Connect audio output TOSLINK or R’L with audio equipment.
  4. Use the remote controller to switch between sources.
  5. Connect 5V power supply to the HDMI 4×2 HIFI matrix.

 

Connect Diagram

HDMI Matrix 4x2 with ARC RS232 EDID Function (3)

Notes:

Please be sure to follow these instructions for safe operation of your unit.

  1. The device should be place far from the damp, high-temperature, dusty, erosive, and oxidative environment.
  2. All parts should be free from strong shake or hit.
  3. Touching the power adaptor with wet hands is prohibited.
  4. Please hold the power adapter head and do not pull the pwoer cord when cut off from the socket.
  5. Please turn the power off when the unit is not in use for long time.
  6. Please do not open the cover and do not touch the inside parts.
  7. Please use the original factory power adapter.
  8. Before power on, please check the connection line carefully. Make sure that all interfaces are securely connected.