DVI extender Over Cat5/6 60m repeater Over Cat6 cat5 60m Support RJ45 1080P (HY-CAT5e6-60M-DVI)

DVI extender Over Cat5/6 60m repeater Over Cat6 cat5 60m Support RJ45 1080P

1.0 INTRODUCTION

Used for a pair extension of this DVI CAT 6 cable to extend HD signal up to 60 meters, and can achieve 1080P, which not only broke the DVI cable transmission length limitations, but also more convenient and flexible, the majority of customers are more cost savings. The production equipment company providing solutions for the following applications: such as noise, limited transmission distance and safety of the place, data center control, information distribution, conference room presentations and teaching environment and corporate training sites.

Our devices offers solutions for noise, space and security concerns, data center control,information distribution, conference room presentation, school and corporate training environments.

2.0 FEATURES

• HDCP 1.2 protocol compliant.
• Support EDID learning.
• Cable line with IEEE-568B standard.
• Support video input and output: 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i.
• Signal transmission: Single cat-6e or cat-6(recommended) cable up to 60 meters.
• Support up to Smetres AWG26 cable length between extender and source & sink device.
• No loss of quality.
• DC over voltage protection.
• Easy install & operation.
• Support hot plug & play.
• Installs in minutes.

3.0 SPECIFICATIONS

• Length of CAT6 cable between Rx and TX: Up to 60 metres
• DVI Input: 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i
• Support audio format input: DTS-HD/Dolby-trueHD/LPCM7. 1/DTS/Dolby-AC3/DSD
• DVI Output: 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i
• Support audio format output: DTS-HD/Dolby-trueHD/LPCM7. 1/DTS/Dolby-AC3-DSD
• Max transmission bandwidth: 5.1Gbps
• Input Video signal: 0.5~1.5Volts p-p
• Output DDC signal: 5Volts p-p(TTL)
• Input/Output HDMI1.3 cable distance: ≤20m AWG26 HDMI 1.3 standard cable
• Max working current: 400mA
• Power adapter format: Input:AC(50Hz,60Hz)100-240V; Output:DC5V/1A
• Operating Temperature range: (-15 C to+55C )
• Operating Humidity range: 5% to 90% RH(No Condensation)
• Size of Transmitter (L x W x H): 87x44x23mm
• Weight of Transmitter(Net): 105g
• Size of Receiver(L x W x H): 87x44x23mm
• Weight of Receiver(Net): 105g

4.0 PANEL DESCRIPTIONS

5.0 CONNECTING AND OPERATING

1. Connect one DVI 1.3 cable up to 20 metres between source device and TX Extender.
2. Connect one DVI 1.3 cable up to 20 metres between sink device and RX Extender.
3. Connect single cat6 or cat-6(recommended) cables up to 60 metres instead of DVI calbe between TX and RX Extender.
4. Connect 5V power supply to the DVI CAT60RX&TX Extender
5. Learning EDID, the display device connected to the TX, long press for 3 seconds EDID, status indicator light flashing, copy is complete, (note: if there is no access to display devices, will restore the system default EDID)
6. 

6.0 PACKING