Menu
Introduction
An HDMI distributor is a product that can distribute an HDMIsignal to one or more display terminal devices, such as HDTV, without loss. It can optimize your home theater system for the best results.
The product is a 1 x 2 HDMI 2.1 splitter. It supports resolutions up to 8K@60 and 4K@120Hz 10bit in FRL mode, and 4K@120Hz 4:2:0 12bit in DSC mode. The splitter is latest HDCP 2.3 compliant. It also features EDID management and a simple 8K-to-1080P downscaler, both functions can be set through front panel DIP switch.
Parameter
1. Fully comply with the HDMI 2.1 specifications.
2. Suitable for source devices with HDMI interface or digital interface and
high definition display terminal devices, such as Blu-ray player HDTV.
3. On-chip HDCPRX/TX encryptors conforming to HDMI1.4 to HDMI2.1
specifications and HDCP1.4/2.3 specifications.
4 Broadband domain :25MHz-600MHz
5. Support resolution up to 8K@60Hz and downward compatibility
6. Support standard audio,DSD audio and HD(HBR) audio support HDMI
input port and 2HDMI output port support conversion HDMI signal to
HDMI signal.
7. Conversion from HDCP2.3 to HDCP1.4 is supported.
8. EDID DIP switch is supported and resolution compatibility can be
realized based on fluctuating EDID switches of back-end devices
9.LED display signal input and output
10. Power supply (refer to technical parameters).
Key Feature
●One HDMI 2.1 input and two HDMI 2.1 outputs;
●Supports resolutions up to 8K@60 4:2:0 and 4K@120 10bit in FRL
mode,and up to 4K@120Hz 4:2:0 12bit in DSC mode, with HDCP 2.3
compatible;
●Supports up to 40Gbps FRL and 18Gbps TMDS;
●FRL to TMDS and TMDS to FRL mode conversion;
●HDR pass-through, including dynamic HDR metadata, i.e., HDR
10+ and Dolby Vision;
●DSC 1.2a pass-through;
●EDID management through DIP switch, including EDID presets and
EDID copy;
●Supports HDMI audio de-embedding from SPDIF port, up to 5.1CH
multi-channel;
●Supports HDMI bypass and 8K-to-1080p simple downscaler mode on
HDMI output 2
Interface Diagram
Connection
1. Connect an HDMI source device, such as a DVD, to the input port on
the HDMI distributor.
2. Connect the input port of the HDTV to the output port of the HDMI
distributor.
3. After all connections are successful, you can watch HD videos on
different HDTVS or monitors
Note: When the HDMI dispenser is working, make sure that the source
devices such as DVDS and display devices are properly connected to the
cable. Power the dispenser first, then the source device, in order for the
relevant interfaces to work properly.
One dip code function:
Only two levels are set: compose_init edid intersection mode
Only 3 shifts: copy out2 edid mode
Only 4 stops were set: compose_downscaler edid downscaler mode.
(1). If the three gears are not set, the compose_init edid intersection
mode is used by default
(2). If it is adjusted to one of the above three gears, power on and start
up is the corresponding file function
(3) If the switch of the corresponding gear has been shifted to the
corresponding gear, the edid mode switching function action will not be
performed. At this time, the edid mode switching function action will be
performed only when the switch of the same gear is changed to another
gear. Ensure that the action will not be repeated after the switch of the
same gear is switched once.
two. Use out2 for the copy port
three. In downscaler mode, the downscaler port is fixed and out1 is
used as the downscaler port
four. Use out2 for CEC.
Transmission Distance
Interface
In put………………………………………………HDMI Typec-A(Female) x 1
Out put…………HDMI Type-A (Female) x 1 Toslink(Female) x 1
FW updarc………………………………………………..Micro USB (Female)
Transmission
HDMI Compliance……………………………………………………..HDMI 2.1
HDCP Compliance………………………………………………….1.4 ,2.2,2.3
Output Resolution(Max.)…………………FRL Mode : Up to 8K@60Hz
(7680 x 4320P) 4:2:0 10bit DSC Mode : up to 4K@120Hz (10240 x 4320P) 4:2:0 12bit
Maximum Data Rate………FRL Mode: 40Gbps TMDS Mode: 18Gbps
Audio Format……………HDMI In/Out: up to PCM 7.1 192KHz, Dolby Digital Plus and Dolby Tru e-HD up to 192KHz, Dolby Atmos and DTS:x S/PDIF Out: up to PCM 2CH 192KHz, Dolby Digital, Dolby Digital Plus, and DTS 5.1CH
Power
Power Supply………………………………………………………….22V/1A DC
Max Power Consumption………………………………………………….2.2W
Environment
Operating Temperatuer……………………………………………..0°C~45°C
Storage Temperature……………………………………………..-20°C~70°C
Product Structure
Main Material………………………………………………………………….Metal
Size W x D x H……………………………………140mm x18mm x80.2mm
Weight……………………………………………………………………………250g
