HDMI Single Cat5e/6 Wall Plate Extender (HY-ET31050-P-E)

SKU HY-ET31050-P-E Category Tags ,

HDMI Single Cat5e/6 Wall Plate Extender

Introduction

Single Cat5e/6 Wall Plate Extender includes transmitter and receiver. Transmitters
combine HDMI video, audio and control signals, then transmit them through single
CAT5e cable. Receivers get these signals, separate signals and rebuild video, audio
and control , output through HDMI interfaces. It also supports bi-direction remote
IR(RX-TX and TX-RX), power over. This product can achieve all functions through single
CAT5e cable. Extending distance is 50 meters for 1080p 60Hz HD signal.

Features

  • Exending distance is 170ft(50 meters) at resolutions 1080P 3D or 1920×1200 60fps, and at 1080i/720P through single CAT5e cable.
  • Supports audio formats, Dolby True HD, DTS-master, etc.
  • Supports 3D signals (all 7 formats), such as Frame Packing, Side-by-side, Top-to-Bottom, etc.
  • VESA DDC and hot swap technology(HPD).
  • Supports power over UTP cable, single 12V DC power supply from any side of TX or RX.
  • Bi-direction remote IR(RX-TX and TX-RX).
  • Be compatible with DVI 1.0.
  • Supports cascade to enhance extending distance.

HDMI Single Cat5e6 Wall Plate Extender (5) HDMI Single Cat5e6 Wall Plate Extender (5)

Parameters

  • Transmitter: HDMl input,lR output (3.5mm), lR input (3.5mm),RJ45 Ethernet interface,12v DC in.
  • Receiver: HDMl output,lR output (3.5mm),lR input (3.5mm),RJ45Ethernet interface,12V DC in.
  • Power: <3.5W TX or<2.5W RX
  • Dimension(Lx W xH):
    • Transmitter: 115x70x34mm
    • Receiver: 115x70x34mm
  • Net weight: Transmitter: 70gReceiver: 70g
  • Video bandwidth: Maximum TMDS clock frequency 165MHz,4.95Gbps
  • Resolution and distance: 1080P 170ft(50meters)-CAT5e/200ft(60meters)-CAT6
    720P/1080i 200ft(60meters)-CAT5e/270ft(80meters)-CAT6
  • Audio formats: 8-channel,support Dolby True HD and DTS Master
  • TMDS input signal: 1.2 volts (point to point)
  • DDC input signal: 5 volts (point to point)
  • lndicator: Power: Red,video link: green
  • HDMl interface standard: HDMI 1.3 standard (HDMl 1.4b 3D function),HDCP1.2, support EDID
  • Remote lR: 38KHz(Model A) or 20-60KHz(Model B)
  • ESD level: HBM±8KV(Contact Dischatge)
  • Temperature range: 0~40°C(operation),-20~60°c(stock)
  • Compliance: FCC,CE,RoHS

Panel Descriptions

Transmitter

HDMI Single Cat5e6 Wall Plate Extender (5)

1. HDMI Input port, connect to video source
2. DC 12V input
3. IR receiver input
4. IR blaster output
5. Status indicator
6. Power indicator
7. Internal 12V DC input port
8. CAT5e/6 cable RJ45 port

Receiver

HDMI Single Cat5e6 Wall Plate Extender (5)

1. HDMI output port, connect to display terminal
2. DC 12V input
3. IR receiver input
4. IR blaster output
5. Status indicator
6. Power indicator
7. Internal 12V DC input port
8. CAT5e/6 cable RJ45 port

 

Operating and Connecting

HDMI Single Cat5e6 Wall Plate Extender (5)

Transmitter side connection:

a) Connect your Player and HDMI IN port of transmitter with HDMI cable (HDMI
cable are not included in this product).
b) Insert IR blaster cable to extender TX IR OUT port. IR blaster should be close
to your player or other controlled equipment. TX IR IN port can be connected
to an IR receiving cable.
c) Insert CAT5e/6 cable to CAT5e/6 port.
d) Connect power adapter or provide DC input from rear DC input port. If RX side
has connected DC adapter, TX can get the DC power over UTP cable, so can
leave DC input port empty.

Receiver side connection

a) Connect your HDTV and HDMI OUT port receiver with HDMI cable (HDMI cable
are not included in this product).
b) Insert IR receiving cable to extender RX IR IN port. IR receiver should be face
outside for easy operation. RX IR OUT port can be connected to an other IR
blaster cable.
c) Insert CAT5e/6 cable to CAT5e/6 port.
d) Connect power adapter or provide DC input from rear DC input port. If TX side
has connected DC adapter, RX can get the DC power over UTP cable, so can
leave DC input port empty

 

Remote IR function

Using video source(such as Blue-ray DVD) IR controller faces extender RX side receiver.
IR signal will be transmitted to extender TX side IR output port, to control video source
directly. Similarly using display terminal(such as TV, projector) IR controller faces extender
TX side IR receiver. IR signal will be transmitter to extender RX side IR output port, to
control display terminal directly.

Package Contents

1. Transmitter x1
2. Receiver x1
3. IR blaster x2
4. IR receiver x2
5. DC 12V/1A adapter x1
6. User manual x1